Green Technology

How To Construct A DIY Photo voltaic Battery Field


Constructing a DIY photo voltaic battery field is your greatest cost-saving possibility in case you’re in search of a transportable energy station that matches your photo voltaic panels.

You could already be accustomed to manufacturers like BluettiJackery, or EcoFlow and their bestselling product — the photo voltaic generator

These parts are designed to retailer photo voltaic vitality on demand, however their excessive value will be off-putting.

Fortuitously, you possibly can circumvent this pricey funding by constructing your very personal DIY plug-and-play photo voltaic battery field at a fraction of the worth! The constructing course of takes solely 2 hours over 7 steps.

Our DIY information additionally features a price estimate for 2 DIY photo voltaic battery bins of 640 Wh and 1200 Wh for a brief tenting journey or a extra prolonged off-the-grid trip.

Foreward

Climatebiz specialists design, analysis, fact-check & edit all work meticulously.

Affiliate Disclaimer

Climatebiz is reader-supported. We might earn an affiliate fee whenever you purchase by way of hyperlinks on our website.

What Is A DIY Photo voltaic Battery Field?

A DIY photo voltaic battery field is a chargeable moveable energy station that provides AC electrical energy (110V, 60Hz) and USB charging.

This all-in-one answer combines three major parts:

  • Photo voltaic cost controller
  • Inverter
  • Lithium battery pack

Here’s a simplified electrical diagram for a photo voltaic battery field:


Photo voltaic Charger

The photo voltaic cost controller ensures secure and environment friendly charging of the battery with a photo voltaic panel. It ensures that the battery receives the proper voltage (12V, 24V, or 48V) and follows the correct charging profile. 

We suggest the MPPT fashions; they’re essentially the most environment friendly.


Inverter

The inverter provides energy to the hundreds. It converts DC electrical energy from the battery into AC electrical energy usable by our home equipment.

We suggest a Pure sine wave inverter. It offers clear and dependable electrical energy, much like utility requirements (110V, 60Hz).


Lithium Battery Pack

A lithium battery pack shops and provides electrical vitality. It consists of a number of modules linked in parallel and/or sequence to achieve the specified voltage and capability.

Lithium batteries are dependable and sturdy; they provide a number of benefits:

  • Modular design
  • Lengthy life period (4000 cycles, 10 years)
  • Quick charging/discharging
  • Excessive vitality density

Our construct makes use of prismatic LiFePO4 (LFP) modules, every with a rated voltage of three.2V. These 4 modules will hyperlink up in sequence to create a 12.8V lithium battery.


Materials Wanted For A DIY Photo voltaic Battery Field

Listed below are the parts you’ll want to your DIY construct:


Instruments Wanted For A DIY Photo voltaic Battery Field

Listed below are the instruments you’ll have to construct your photo voltaic battery field:


How To Construct A DIY Photo voltaic Battery Field

The specs of our DIY photo voltaic battery field are as follows:

Capability640 Wh
Energy output500W steady (1000W surge)
Max photo voltaic charging energy260W
Time to full cost with a 200W photo voltaic panel4-5 hours
WeightLower than 22lbs
Dimension10.62 x 9.68 x 6.87 inches
Output2*AC 110V & 2 USB
EnterPhoto voltaic panel charging (max 260W)

Now that you just’ve gathered your supplies and instruments, it’s time to arrange your workspace and get cracking!

Right here is the 6-step course of to your DIY photo voltaic battery field:


1. Assemble The Lithium Battery Pack

This step includes constructing a 12V, 50Ah(650Wh) lithium battery financial institution prepared to slot in your DIY photo voltaic battery field.

For this step, you’ll want the next:

  • 4 Lithium battery modules (3.2V, 50Ah)
  • BMS
  • Battery balancer
  • Battery capability monitor
  • Electrical wires
  • Electrical tape
  • Ring and fork terminal

First, let’s take a look on the last results of a lithium battery pack with 4 modules:

4 LFP modules with BMS and balancer — DIY solar battery box.
4 LFP modules with BMS and balancer.

Mix The 4 Battery Modules

First, assemble the 4 modules (B1, B2, B3, B4). Make them stand and set up them as pictured. The constructive electrode of 1 module needs to be near the adverse electrode of the following one.

The battery modules include bus bars and nuts; place the bus bars to attach the 4 modules in a serry. At this level, get some duct tape and wrap the 4 modules collectively as tight as attainable. The rated voltage of every module is 3.2V; in whole, you’ll get 12.8V.

Wire The Battery Balancer

Now, add the battery balancer — it helps keep every battery module on the similar state of cost.

To do that, seize the micro connector string of wires and add a hoop terminal to every wire. Don’t join the wire string to the battery balancer but. As an alternative, place every wire electrode on the corresponding battery module terminal.

You’llYou’ll begin with B-, which is linked to the primary adverse electrode of B1. Then go on with the 4 different wires connecting to every battery module’s constructive electrode, from B1+ to B4+. You’llYou’ll perform the identical course of for the wiring of the BMS.

Wire The BMS

BMS is an integral part of a lithium battery financial institution — it displays and protects the battery

Seize the micro connector string of the BMS and add a terminal ring to every wire. For the bigger B- cable, you’ll want an AWG4 ring.

Place every wire on the corresponding battery module electrode. B- goes on the adverse electrode of the primary module, then B1+ to B4+ to the constructive electrode of every module (B1 to B4).

Voltage Testing

Now, tighten the screws of every bus bar on prime of the battery modules.

Now that every one the modules are linked, it’s time to check your wirings.

First, verify the general voltage of the pack by measuring between B1- and B4+ — it’s best to learn round 12.8V. Then verify the voltage of the battery balancer.

Seize the micro connector string, and measure the voltage between every wire with the needle electrode of your multimeter. Preserve the multimeter adverse electrode on B1- and transfer the constructive electrode from B1+ to B4+. You need to learn 3.2V for B1+, 6.4V for B2+, 9.6V for B3+, and 12.8V for B4+.

Repeat the identical operation for the wires of the BMS. Now you can join your battery balancer and BMS if every little thing is okay. 

That’s it; you will have a full lithium battery pack!


2. Put together The Case

Now it’s time to organize your field to carry its constituents. All of the shops, the primary swap, and the battery monitoring display are accessible from the highest of the field.

Use your drill with the gap noticed accent to put in the AC shops. Insert the plug and apply silicone sealant on the edge.

Repeat the identical operation for the photo voltaic panel wires and the major swap utilizing waterproof electrical connectors.

For the battery monitoring system, you’ll want to chop a rectangular form, don’t overlook to seal it with silicone.


3.      Set up The Battery Pack

Lithium battery pack with BMS, Lynx Battery.
Lithium battery pack with BMS, Lynx Battery.

The most important element of this DIY photo voltaic battery field is the battery pack — it’s good to set up it first.

Be at liberty to arrange your area within the field. Nevertheless, we recommend strapping the battery pack in one of many corners.


4.      Set up The Inverter

Firmly keep the inverter with straps contained in the case. Ensure it’s positioned close to the adverse and constructive electrodes of the battery.


5.      Set up The Photo voltaic Cost Controller

The photo voltaic cost controller is comparatively small, so it’s best to set up it final. Put it so far as attainable from the inverter for higher thermal administration. 


6.      Wire The System

Lastly, it’s time to wire all of the parts, beginning with the inverter.

Join the 2 AC shops to the inverter. 

  • Use the 4AWG cable to attach the inverter and the battery.
  • Get the 12AWG wire and hyperlink the photo voltaic cost controller to the battery and the photo voltaic panel extension cable. 

For security, don’t overlook to add 3 fuses between:

  • The photo voltaic panel and photo voltaic controller
  • The photo voltaic controller and battery
  • The battery and inverter

Your photo voltaic battery field is now full! Now, cost your system by connecting a 200W photo voltaic panel.


DIY Photo voltaic Battery Field Price  

A DIY photo voltaic battery field with a capability of 640Wh and an influence output of 500W prices lower than $570. 

This will provide you with sufficient vitality to energy lights, a cellphone, a laptop computer, a TV, and an electrical fan throughout a brief tenting journey.

For a bigger capability, be ready to spend round $1100. This value level will give you a 1.2kWh and 1.5 kW output. With this battery, you possibly can run a mini fridge/freezer!


Ultimate Ideas

Don’t be afraid of constructing your personal DIY photo voltaic battery field — parts are cheaper than ever, and you’ll entry them simply on-line.

As a bonus, you’ll save some huge cash! The construct is 25 to 30% cheaper than industrial energy stations.

Moreover, due to modular lithium battery know-how, you’ll have the possibility to customise your photo voltaic battery field from a lightweight mannequin for a brief journey to a bigger battery field to energy an off-grid cabin.

Lastly, opposite to industrial fashions, you’ll have the ability to change a element in case of failure.

What's your reaction?

Leave A Reply

Your email address will not be published.