3D Printing

How To Create And 3D Print A Customized Stencil

Engaged on a undertaking which may require a custom-made stencil? Not an issue! With the ability of MatterControl, customers can think about, design, and print precisely what they want. Right here is how…

MatterHackers 3D Printed Stencil 

Creating customized stencils together with your 3D printer is now so simple as making a 2D image in paint (or one other design program if you wish to get fancy). Merely create your stencil design (just like the one under) then add that file to the picture converter. From there you may alter the size and dimension of your stencil in addition to the thickness. Alternatively, you need to use the inbuilt search operate inside the Picture Converter to seek for photos on-line which you’ll then immediately use as a stencil or 3D printed object.

What you’ll want:

  • At the start – an concept for a stencil

  • {Hardware}: any 3D Printer

  • Software program: MatterControl (Free from www.MatterControl.com)


Create your stencil picture:

There are just a few choices at your disposal.

  • Draw your design on paper utilizing black marker, take an image

  • Create a design in Paint or one other illustration program

  • Obtain any silhouette picture or brand from on-line

Create Your Picture

Utilizing MatterControl ‘Picture Converter’ to create stencil:

  • Open MatterControl (obtain right here if you don’t have already got it put in).
  • On the backside of the QUEUE tab click on the ‘Create’ button. It will carry up just a few of the MatterControl Design Instruments.

  • To make your stencil choose ‘Picture Converter’.

  • Choose ‘Add Picture’ and discover your stencil design picture file.

  • By default the picture converter renders the constructive picture. On the suitable panel you will note an ‘Invert’ line, examine that field to create the stencil.

  • Scale the scale and peak of the stencil. You do not want a really tall half for stencil, however it’s endorsed to have at minimal of 4 layers (Roughly 1.2 mm).

Click on On Picture Converter

Default Optimistic Picture

Inverted Picture

Print it!

The stencil will seem within the Queue. Choose the file and settings. A rough layer peak and 25% infil must be tremendous. Printing with PLA must be simply tremendous.

Now that your stencil is full, seize your favourite colour of spray paint and begin claiming issues as your personal!


This Picture Will not Make A Stencil With The “Islands” Within the Ears Of The Canine

Picture Converter is now free in MatterControl 2.0!

With the brand new model of MatterControl, Picture Converter is obtainable without spending a dime for all customers! Obtain MatterControl and test it out!


Completely satisfied Printing!


What's your reaction?

Leave A Reply

Your email address will not be published.